Bloodhunt Crashing on Your PC? Here’s How to Smooth Out Gameplay

Bloodhunt is a thrilling, free-to-play battle royale game set in the Vampire: The Masquerade universe. But if the game keeps crashing and stuttering, it definitely kills your excitement. If you’re on the same boat, don’t worry. We’ve got you covered with some tips onhow to fix the crashing and stuttering issues in Bloodhunt .

How to fix the crashing issue

Below are the fixes for you to try. But before getting started, you need to make sure that your PC meets minimum system requirements.

After you’ve confirmed that your PC is able to run Bloodhunt, try the fixes below.

1. Switch to DX11
2. Verify integrity of game files
3. Update your graphics driver
4. If your game still crashes…

1. Switch to DX11

Some players reported on Reddit that they managed to stop game crashes by forcing the game to start in DX11 mode instead of DX12. To do this, follow the instructions below.

1. Open your Steam client. Under LIBRARY, right-click your game title and selectProperties .

2. Under the GENERAL tab, enter-force -dx11 into the dialog box under the LAUNCH OPTIONS.

Now relaunch your game. If forcing the game to start in DX11 mode doesn’t do the trick, proceed to the next fix.

2. Verify integrity of game files

A variety of issues such as game crashing on PC may be caused by corrupted game files. To troubleshoot your issue, you need to verify your game files on Steam. Below are the steps you can take.

1. Open your Steam client. Under LIBRARY, right-click your game title and selectProperties .

2. Select theLOCAL FILES tab. Then click on the buttonVerify integrity of game files… .

Steam will now verify all of your game files, and compare them with files hosted on the game servers. If there are any discrepancies Steam will redownload, and repair corrupted files.

When the process is complete, launch your game. If your problem persists, try the next fix below.

3. Update your graphics driver

When your game keeps crashing, you would need to consider whether it’s caused by an outdated or misconfigured graphics driver. If you can’t remember when was the last time you updated your drivers, definitely do it right now. This is probably the best shot you have got without doing a lot of troubleshooting. Additionally, graphics card manufacturers usually release game ready drivers to guarantee that you can get the most out of your graphics card.

To update your graphics driver, you can either do it manually via the Device Manager or head to the manufacturer’s driver download page to download and install the exact driver for your system. This requires a certain level of computer knowledge and can be a headache if you aren’t tech-savvy. Therefore, we would like to recommend you use anautomatic driver updater such as Driver Easy . With Driver Easy, you don’t need to waste your time hunting for driver updates as it will take care of the busy work for you.

1. Download and install Driver Easy.
2. Run Driver Easy and click theScan Now button. Driver Easy will then scan your computer and detect any devices with missing or outdated drivers.

3. ClickUpdate All . Driver Easy will then download and update all your outdated and missing device drivers, giving you the latest version of each, direct from the device manufacturer.
(This requires the Pro version which comes with full support and a 30-day money-back guarantee. You’ll be prompted to upgrade when you click Update All. If you don’t want to upgrade to the Pro version, you can also update your drivers with the FREE version. All you need to do is to download them one at a time and manually install them. )

The Pro version of Driver Easy comes with full technical support . If you need assistance, please contact Driver Easy’s support team at [email protected] .

After updating drivers, restart your PC. Then launch your game and you should be able to enjoy your gameplay without much interruptions.

If your game still crashes

However, if your game still crashes a lot even though you had updated your drivers and made sure your PC meets the system requirements, you can try to repair your PC. Program issues can be caused by corrupted system files. While running a scan of a PC can help you diagnose problems and fix them immediately. For that job, we recommend Fortect , a professional computer repair software that will first check hardware-related issues to identify problems, and then security issues, and finally, it detects programs that crash.

Here’s how you can run a scan of your PC with Reimage:

1. Download and install Fortect.
2. Start Fortect and it will run a FREE scan of your PC. Once the scan is finished, you’ll see a complete overview of your system and issues.
3. ClickStart Repair to start the repair process and wait for Fortect to fix the problem.

Software Update Pro - Check and update software installed on your computer.

How to fix the stuttering issue

Nothing all methods are necessary; simply work your way down the list until you find the one that works for you.

1. Disable V-Sync
2. Disable Steam overlay
3. Enable game mode
4. Enable hardware-accelerated GPU scheduling
5. Delete temp files

1. Disable V-Sync

Short for vertical sync, V-Sync is a graphics technology that synchronizes the frame rate of your game to the refresh rate of your monitor. Unfortunately, sometimes V-Sync reduces the input responsiveness of your system while gaming, which can cause your computer to crash. And performance issues would arise.

To see if this is what’s causing your Bloodhunt to stutter a lot, you should disable V-Sync by following the instructions below.

1. Launch your game. Then press Esc on your keyboard.
2. SelectSETTINGS .

3. SelectGRAPHICS . UnderBASIC , make sure the option ENABLE VSYNC is unchecked.

4. Then apply the changes.

If disabling V-Sync doesn’t give you any luck, try the next fix below.

2. Disable Steam overlay

Commonly used in various programs, overlay technology allows you to surf the web and enjoy other features, but can also cause performance issues with some games. Therefore, you may need to disable the Steam overlay and check if it can reduce Bloodhunt in-game stutters. Here’s how you can do this:

1. Open your Steam client. Under LIBRARY, right-click your game title and selectProperties .

2. In the GENERAL tab, uncheck the boxEnable the Steam Overlay while in-game .

If the above doesn’t solve your issue, make sure you’re not running the Rivatuner overlay. Players who are running it are more likely to notice in-game stutters.

3. Enable game mode

After the new release of Windows updates, the game mode feature helps users increase gaming performance by deactivating background activities like app notifications. So you can actually enable this feature to benefit from it. To do this, follow the steps below.

1. On your keyboard, press theWindows logo + I keys simultaneously to open Settings.
2. Click Gaming .

3. Select Game Mode from the left panel. Then toggle On Game Mode.

After applying the changes, test your gameplay. If you still notice severe in-game stutters, try the next fix below.

Project Manager - Asset Browser for 3Ds Max

4. Enable hardware-accelerated GPU scheduling

Hardware-accelerated GPU scheduling is a feature that comes with a recent Windows update designed to provide users with a performance boost. If you have the latest Windows version, a Geforce 10 series or later/ Radeon 5600 or 5700 series graphics card with the latest driver, you can enable this feature and see if it smooths your gameplay. Follow the instructions to do this.

1. Right-click on the empty space from your desktop and select Display settings .

2. Scroll down until you find Graphics settings . Then click on it.

3. Under the Default settings section, click Change default graphics settings .

4. Turn on Hardware-accelerated GPU scheduling .

If that doesn’t work for you, proceed to the next fix.

5. Delete temp files

Temporary files, as the name suggests, are the kind of files that store temporary data. They can clog the system drive and slow down your PC, which is the reason why you can’t really enjoy Bloodhunt to the fullest. Therefore, you need to delete those temporary files and it won’t cause any problems. Below are the steps you can follow.

1. Close all windows.
2. On your keyboard, press the Windows logo + R keys simultaneously to open the Run box.
3. Type or paste**%temp%** and then press Enter.

4. Press Ctrl + A at the same time to select all the files inside the folder. Then right-click and select Delete .

5. If the following prompt appears, simply check Do this for all current items and click Skip .

6. After the files are deleted, go to your desktop and right-click on the Recycling Bin and select Empty Recycle Bin .

Now launch Bloodhunt and you should be able to avoid noticeable stutters.

That’s it. Feel free to drop a comment below if any fixes listed above worked for you. We also welcome alternate methods in case you’ve found one that worked for you.